The equipment is widely used in high-temperature sintering
processes for advanced ceramics, magnetic materials, electronic
ceramic components, and other products.
2. Technical Specification:
Effective Chamber Size: 1200×600×800mm (D×H×W)
External Reference Dimensions: 2880×3600×2240, excluding tracks and
control cabinet
Temperature Range: 1700ºC~1750ºC
Heating Method: Heating Elements
Number of Heating Zones: 1
Insulation Material: Alumina Products / Ceramic Fiber Material
Atmosphere: Air / Oxygen
Number of Control Points: 2
Temperature Control Instrument: Imported Intelligent Temperature
Controller from Japan
Number of Gas Inlet Points: 20 points in total on opposite sides of
the furnace body (10 points on each side)
Operating Power Supply: 220/380VAC 50Hz
Maximum Power: 120kW
Equipment Weight: Approximately 8000kg
3. Delivery List| Table 1 Delivery list |
| Item | Note | Qty. |
| Basic Components | Furnace |
| 1 SET |
| Inspection Certificates | Certificates of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts,
etc | 1 SET |
| Key Components | Silicon molybdenum rod | U-shaped silicon molybdenum heater | 1 SET |
| Power regulator |
| 1 SET |
| Thermocouple |
| 1 SET |
| temperature controller | Island Electric, Dahua Qianye, Eurofins and other similar brands | 1 SET |
| PLC | SIEMENS | 1 SET |
| Touch Screen | 15 cun | 1 SET |
| Spare Parts | Heating Element | U-shaped silicon molybdenum heater | 1 PC |
- Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no
corrosive gas, no strong airflow disturbance;
- Atmosphere Conditions: dry, clean, oil-free compressed air, working
pressure of 0.4- 0.8MPa, gas consumption of 10 -30 m3/h;
- Ventilation System: Non contact access user exhaust system, with an
exhaust capacity greater than 50 m3/h
- Ground Requirements: horizontal, no obvious vibration,
load-bearing> 1000 Kg/m2;
- Power Condition(TBD): capacity > 160kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire
line: yellow, green, red, Zero line: blue, Ground line:
yellow-green;
- Installation Site: 6000mm×4000mm×4000mm(D×W×H), with an installation area greater than 24m2.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air
furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom
furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the
most suitable products, along with highly customizable solutions to
meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and
sales, Chitherm possesses patented technologies and core resources
to deliver superior solutions.
