Product Description

The MBF64-11 medium-temperature box furnace uses silicon carbide rods inserted in ceramic tubes as heating elements, which are resistant to acid and alkali corrosion. The heating elements are arranged vertically, ensuring uniform temperature distribution in the furnace chamber. It is easy to operate and suitable for various laboratory processes.

I. Equipment Name & Model: MBF64-11 Medium-Temperature Box Furnace

II. Application Fields: Primarily used for degassing, sintering, and curing processes of LTCC, glass, electronic components, electronic ceramics, and similar products.

Detailed Photos

Product Parameters

III Product model: MBF64-11 medium-temperature box furnace3.1 Rated Temperature: 1000°C;
3.2 Maximum Temperature: 1100°C;
3.3 Furnace Chamber Size: 600×600×600mm (W×H×D);
3.4 Effective Size: 400×400×400mm (W×H×D);
3.5 Heating Element: FEC Ceramic Fiber Heating Panel;
3.6 Maximum Heating Power: 24kW;
3.7 Standby Power Consumption: ≤12kW;
3.8 Heating Rate: ≤6°C/min;
3.9 Heating Layout: Heating from top, bottom, left, and right sides;
3.10 Temperature Control Points: Independent temperature control at front, middle, and rear points;
3.11 Temperature Stability: ±1°C, with PID auto-tuning function;
3.12 Temperature Uniformity: ±3°C within the effective area (tested at 1000°C with crucible);
3.13 Thermocouple Type: K-type;
3.14 Temperature Controller: Imported temperature control module with PID auto-tuning function;
3.15 Program Steps: 20 steps (adjustable based on process requirements);
3.16 Exhaust Chimney: Equipped with an adjustable exhaust port at the rear;
3.17 Sintering Atmosphere: Air;
3.18 Alarm Protection: Audible and visual alarms for overtemperature and thermocouple breakage, with overtemperature power-off protection;
3.19 Surface Temperature Rise: <35°C;
3.20 Equipment Weight: Approx. 600kg;
3.21 Exterior Color: Light gray;
3.22 Overall Dimensions: 1090×1790×1095mm (W×H×D).

Facility Requirements
1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2. Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m³ /h.
3. Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
4. Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m² .
5. Power conditions: capacity greater than 32kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
6. Installation site: 2200mm×2000mm×2500mm (W×H×D), installation area greater than 4.5m².

1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.

Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.

Our products include Bell Furnaces, Box Furnaces, Hot Air Dryer, Tube Furnaces, Vacuum Furnaces, Trolley Furnaces, and Rotary Furnaces. All of which are widely used in scientific research and experimentation in advanced ceramics, additive manufacturing, powder metallurgy, new energy and other fields. Suitable for the extrusion, sintering process of magnetic materials, honeycomb ceramics, alumina ceramics, zirconia ceramics, CIM/MIM, and positive and negative electrode materials of lithium batteries, as well as various other new materials such as pre-firing, extrusion, degreasing, firing, drying, co-firing, post-firing, soldering, curing, ceramic metallization, etc.

We insist responsible attitude towards customers and provide high-quality products and services. It is precisely because of the support, understanding, and trust of our customers and friends that our intelligent equipment manufacturing capabilities continue to improve. We are willing to work with customers to support the rapid development of electronis and advance materials all over the world.