This equipment is mainly designed for electronic ceramic materials, magnetic materials, ceramic filters, etc. require high uniformity of temperature field or multi-species small batch production occasions.

2. Technical Specification:

1. Rated Temp:1650ºC
2. Max Temp:1700ºC
3. Effective Dimensions:550mm×500mm×550mm(D×W×H)
4. Heating Method: U-shaped silicon molybdenum heater
5. Thermcouple:B-Type
6. Temperature Control: 1 Point
7. Temp. Set Accuracy: ±1ºC(flat temp. insulation)
8. Temp. Control Mode:control module imported from Japan with PID
9. Heat-up Rate :400 ~ 1000≤5ºC/min,1000 ~ 1500≤2ºC/min
10. Temp. Uniformity: ± 5ºC (empty furnace insulation test 2hours under 1500ºC)
11. Program Tracking Accuracy: ±2ºC (>600ºC)
12. Furnace Surface Temperature ≤ RT+35ºC
13. Maximum Lifting Trip:800mm
14. Lift System: the equipment lifting operation system adopts three-point control, which can be stopped at any time, with stable and reliable operation
15. Loading Weight ≤ 1000kg (with firing furniture and products)
16. Atmosphere Control : four channels of air inlet, each channel of air flow is controlled by the glass rotor flowmeter, single range of 12 ~ 120L / min
17. Exhaust System : 1 exhaust chimney is set at the top for exhaust gas emission
18. Alarm System : with over-temperature, broken couple, overload, over-range, deviation and other sound and light alarm protection function
19. Maximum Heating Power:50kW
20. Insulation Power:≤25kW
21. External Dimensions: 1740×2780×2505mm(D×W×H) (without control cabinet)
22. Appearance Color: Light gray

3. Delivery List

4.Equipment Normal Operating Conditions

1. Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no corrosive gas, no strong airflow disturbance;
2. Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.2- 0.4MPa, gas consumption of 10 - 30 m³/h;
3. Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 35 m³/h
4. Ground Requirements: horizontal, no obvious vibration, load-bearing> 600 Kg/m²;
5. Power Condition(TBD): capacity > 70kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
6. Installation Site:3800mm×2650mm×3500mm(D×W×H), with an installation area greater than 12m².

Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.

Our products include Bell Furnaces, Box Furnaces, Hot Air Dryer, Tube Furnaces, Vacuum Furnaces, Trolley Furnaces, and Rotary Furnaces. All of which are widely used in scientific research and experimentation in advanced ceramics, additive manufacturing, powder metallurgy, new energy and other fields. Suitable for the extrusion, sintering process of magnetic materials, honeycomb ceramics, alumina ceramics, zirconia ceramics, CIM/MIM, and positive and negative electrode materials of lithium batteries, as well as various other new materials such as pre-firing, extrusion, degreasing, firing, drying, co-firing, post-firing, soldering, curing, ceramic metallization, etc.

We insist responsible attitude towards customers and provide high-quality products and services. It is precisely because of the support, understanding, and trust of our customers and friends that our intelligent equipment manufacturing capabilities continue to improve. We are willing to work with customers to support the rapid development of electronis and advance materials all over the world.